EPTZ – 1/4″ day / night outdoor. Speed dome camera Communication: RS Built-in protocols: Pelco-P / Pelco-D / EverFocus /. ED / ED EPTZ/EPTZI, an intelligent high-speed dome camera is ready to secure your property Ihr EverFocus Produkt wurde entwickelt und hergestellt mit. View and Download EverFocus Eptz user manual online. EverFocus Speed Dome User Manual. Eptz Security Camera pdf manual download.
|Published (Last):||7 November 2008|
|PDF File Size:||7.48 Mb|
|ePub File Size:||5.6 Mb|
|Price:||Free* [*Free Regsitration Required]|
Structure of the Setup Menu A 30X optical and 8X digital zoom combining with a high-performance chip makes captured images clear and vivid. Wide Dynamic makes objects clear in a high illumination background.
Furthermore, the micro control unit enables eveffocus a nimble and exact movement from minimal 0. It can go to every preset position in 1 second. It also has other advantages such as: JP1 and JP3 are connectors for heater, and they can be switched. The two switches are used to set address, protocol, Baud Rate, video format and terminal resistance.
Everfocus EPTZ Dome camera Specifications | Everfocus Dome camera –
M3 screw x3 for bulb fixing 2. An extension power line may be needed. The input AC voltage range of an adapter depends on different area. An amplifier may be needed if the video cable is too long. Installation location that is a wall, a pole or a ceiling needs to support above five times the total weight of the camera assembly about 16 kg to avoid shaken images, and dropping.
Connect the cable connectors to the nodes on the PCB board, and then fix the PCB board in the housing by screwing 4 bolts on it.
Please notice the polarity of control line. The EPTZ will not work if the polarity of control line is mis-connected. Align the two screw holes on the bottom of mechanical part to the two bolts on the base of the housing, and twist the mechanical part clockwise a little bit in order to engage it with the base.
Screw the two bolts on the base, and then connect and fix the connection bus to the PCB board on the mechanical part.
Turn on the power, and start to operate the EPTZ When turning on the power, EPTZ will enter self-inspection mode, and carry out a self-testing program.
After finishing self-inspection, you can start to operate the EPTZ The camera module on the mechanical part is very sensitive. Please be careful when installing this part. Remove the lens protection cover before installing the bulb.
Screw the connection wire to the housing in order to prevent the bulb from being drop down. Align the 2 buttons on the bulb base with the 2 buttons on the housing, and push bulb base to clip the housing.
Ceiling Pendant Mount Adapter The pole mount is used for installing a speed dome on the ceiling indoors or outdoors. The extension poles are available for the pole mount. Pole Mount Adapter The pole adapter is used for installing a wall mount bracket to a pole indoors or outdoors. There are 25 items of the setting menu.
However, there is only one line on the line display, so using some combination keys to operate is necessary.
Everfocus EPTZ3000 520TVL WDR Day/Night 30X Zoom PTZ Camera
Camera Setup Menu Press Menu to enter camera setup menu. Enable a digital zoom. In order to enhance the view in the low lux environment, slow shutter allows more light go through the shutter. Disable the title display. Enable a normal open alarm input.
Enable a normal close alarm input. Disable the private zone masking.
You can set the masking size and position in the private zone setup mode. It can shorten the response delay, sptz3000 increase the response performance and speed dome lifetime. Enable the auto regress function. Disable the auto regress function. Alternatively, you could run the tour without entering MENU.
Position Setting Focus everfoocus a preset position: Press the number key, and then press Position to focus on the number of preset position; or you can press Position, then enter the preset position number, and then press Enter to focus on the number of preset position. Pan setting dwell time of A pos or B pos.
Tour, and input tour number 0. Set an alarm link: Press F1 to set an alarm link.
EverFocus EPTZ 1/4″ Day/Night PTZ Dome Camera EPTZ
After powering on the speed dome, it will detect alarm status automatically. The available control functions depend on different DVRs. It is located on the PCB board of the housing. Also See for Eptz Specifications – 1 page User manual – 39 pages. Page of 43 Go. Table of Contents Add to my manuals Add.
Page 5 Furthermore, the micro control unit enables camera a nimble and exact movement from minimal 0. Communication Protocol Setting Notice: Rack And Speed Dome Installation 2. Eptz0300 Dome Camera Installation 7. Camera Setup Menu 3. Position Setting not tilt. Tour Mode Dwell time: Other Operations Note 2: Page 43 EverFocus Electronics Corp. This manual also for: Comments to this Manuals Your Name.
Enter text from picture: By pressing ‘print’ button you will print only current page.
To print the manual completely, please, download it. Don’t show me this message again.
Got it, continue to print. Don’t have an account?